Other listings by this author |
|
 MITCalc Slender strut buckling 1.20 (Downloads: 1317)
Calculation of the slender strut (column) buckling The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slende...
|
|
 MITCalc Tolerance analysis 1.19 (Downloads: 1209)
Tolerance analysis of linear, 2D and 3D dimensional chains Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains
1) Tolerance analysis of linear dimensional chains.
The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following
problems:
- Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case) method, possibly the statistical "RSS" (Root Sum Square...
|
|
 MITCalc Pinned couplings 1.19 (Downloads: 1655)
Geometric design and strength check of couplings using pins and clevis pins The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks:
- Design of pin for spring attachment.
- Design of couplings with securing pins.
- Design of cross pin in rod and sleeve.
- Design of radial pin for shaft-hub connection.
- Design of longitudinal pin for shaft-hub connection.
- Design of clevis pin for rotating rod-clev...
|
|
 MITCalc3D for Autodesk Inventor 1.61 (Downloads: 407)
Mechanical, Industrial and Technical Calculations for Autodesk Inventor MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, b...
|
|
 MITCalc Compression Springs 1.22 (Downloads: 1442)
Geometric and strength designs of helical compression cylindrical springs The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of a spring.
- Selection of an optimal alternative of spring design in view of strength, geometry and we...
|
|
 MITCalc Roller Chains Calculation 1.21 (Downloads: 1252)
Design and strength check of roller chain transmission The calculation is designed for a geometrical design and strength check of common chain transmissions using roller
chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the
following tasks:
- Selection of a power suitable type of chain.
- Selection of an optimum transmission alternative regarding power, geometry and weight.
- Calculation of geometric, strength, safety and oper...
|
|
 MITCalc Plates design and calculation 1.15 (Downloads: 1281)
Deflection, stress and variation of forces in the loaded flat plates This calculation deals with the deflection, stress and variation of forces in the loaded flat plates. The calculation is designed for plates that are flat, homogeneous, with the same thickness and made from one material. The plates may be circular, annular circular and rectangular. The plates may be loaded evenly (unevenly) on the whole surface (or its part) or they may be loaded by the force distributed on the circle. The programme enables:
- Selection from c...
|
|
 MITCalc Spur Gear Calculation 1.24 (Downloads: 1229)
Geometric design and strength check of spur gear (straight and helical) Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complet...
|
|
 MITCalc Springs 15 types 1.17 (Downloads: 1256)
Geometrical design and strength check of 15 springs types The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round...
|
|
 MITCalc Straight beams calculation 1.21 (Downloads: 1505)
Calculations of the straight beams with constant cross section. The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supp...
|
|
 MITCalc Welded connections 1.15 (Downloads: 1379)
Geometrical design and complex strength check of welded connections The calculation is intended for the geometrical design and strength control of statically loaded welded connections of machine structures manufactured from carbon steels. The program enables you to design over 50 of the most common types of welded connections stressed by various combinations of load. The calculation deals with the following tasks:
- Design of connections with butt welds.
- Design of connections with fillet welds.
- Design of conn...
|
|
 MITCalc Profiles Calculation 1.20 (Downloads: 1312)
Area characteristic of profiles and mass characteristic of solids The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Creation of a profile in a simple graphic editor.
- Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity.
...
|
|
 MITCalc Tolerances 1.20 (Downloads: 1260)
Tolerances, deviations and fits of machine parts This calculation includes tables and calculations for easy option of fits of machine parts and determination of their dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Selection of suitable fits of machine parts according to the international standard ISO 286.
- Determination of dimensional tolerances and deviations of machine parts ac...
|
|
MITCalc3D for Solid Edge 1.61 (Downloads: 450)
Mechanical, Industrial and Technical Calculations for Solid Edge MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, b...
|
|
 MITCalc Shafts Calculation 1.24 (Downloads: 1241)
Geometrical design and complex strength check of shafts The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
- Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration.
- Simple definition of s...
|
|
 MITCalc Multi pulley calculation 1.21 (Downloads: 1355)
Designs of belt and chain transmission with more sprocket wheels The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels
- Achieving the desired (table) length of the belt / chain using a change in the position of ...
|
|
 MITCalc - Technical Formulas 1.19 (Downloads: 583)
Technical formulas (Solids, motion, friction...) / Units convertor Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well
as many selection tables with values of various coefficients and material properties are available for the formulas.
The following matters are solved in the workbook:
- Characteristics of solids (volume, surface, weight, inertia moment)
- Rectilinear motion (speed, acceleration, trajectory, time, force, energy....)
- Rot...
|
Audio DVD Maker 1.0: Audio DVD Maker is an innovative utility for you to personalize your own DVD
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.